$24.95 $34.95Size Guide
We have one of these belts available at a reduced price due to slight scuff on leather. It's not perfect, so you get a deal! Trim-to-fit belt fits everyone up to 44 inches! .
Nickel Smart™ Black Dress Belt features clean classic lines, top grain leather and quality workmanship. A single stitch refines and accentuates the soft comfortable strap. This belt is a trim-to-fit belt, meaning you will receive a 44-inch belt strap with instructions to trim to the perfect size!
The buckle is truly nickel-free and has an aggressive hold when it is clamped into place. The finish and base metal on this clamp pin buckle are nickel-free, guaranteed never to test positive for nickel.
Have the perfect fitting belt without the fear of a nickel allergy rash. The nickel free buckle incorporates a clamp mechanism so you size the belt strap to your liking. Simply unclamp the 44 inch strap, trim-to-fit your size, then re-clamp the buckle-it’s that easy!
We guarantee this product's durability for one year of normal wear.
Width: 1⅜ inches or 35 mm wide
Trim-to-fit belt strap has has a maximum size of 44 inches (112 cm)
Trim-to-Fit Belt Instructions:
To size your trim-to-fit belt, simply unclamp the buckle by lifting the tab (or lever) on the back side of the buckle. This will release the belt strap, allowing you to remove it from the clamp pin buckle. See illustration below:
To determine the perfect size, we recommend watching our educational video on belt sizing. If you are in a hurry and need to size the belt now, then measure your waist through your belt loops using a tape measure. The resulting number of inches or centimeters* is your belt size. From the middle hole of your new belt, measure out the number of inches or centimeters of your belt size. This is the point where you will cut the belt. If your belt size is 34 inches, there should be this length between the middle hole and the end of the belt where you will make your cut. Mark the strap and double check your measurements before proceeding.
Use sharp scissors and cut through the belt strap at the marked spot.
Slide the clamp pin buckle onto the cut strap and press the tab firmly into the strap. Once the buckle is clamped into place, your belt is ready to wear!
We are here to help! Please let us know if you need additional assistance: call us at 704-947-1917.
$34.95 $49.95Size Guide
These belts have minor blemishes in the leather and since they aren't perfect, you get a great deal! The imperfections will not affect the structural integrity of the belt and the belt is still guaranteed...
Most of our belts are sized from the Buckle Fold to the Middle Hole. A 36” belt will have a middle hole at 36” and two holes on either side of the center spaced 1” apart each. A 36” belt can be worn as small as 34” and as big as 38”.
There are several options to determine your ideal belt size.
The ideal way is to measure your waist through your belt loops. This measurement is the size of belt you should purchase (i.e. if you have a 34” measurement, order a 34” belt).
An alternative option is to measure your old belt from the Buckle Fold to the Hole you use. If your belt measures 38” from buckle fold to the hole you use most; then order a 38” belt. This will give you a belt with 2 holes either side of the hole you use most.
If you still have questions, please call us! 704-947-1917
Copyright © 2003-2018 Athena Allergy Inc. All rights reserved