Now Accepting Amazon Pay

0

Your Cart is Empty

Sale

4104-2-44*

Dress Black and Tan Combo by Nickel Smart®

Size Guide

These belts feature clean classic lines, top grain leather and quality workmanship. A single stitch refines and accentuates the soft comfortable strap. These belts are  trim-to-fit belts, meaning you will receive your choice of either a  44-inch belt strap or a 50 inch belt strap, with instructions to trim to the perfect size!

The buckles are truly nickel-free and have an aggressive hold when clamped into place. The finish and base metal on the clamp pin buckles are nickel-free,  guaranteed never to test positive for nickel.

Have the perfect fitting belts without the fear of a nickel allergy rash.  The nickel free buckle incorporates a clamp mechanism so you size the belt strap to your liking. 

Please note these belts come in your choice of a 44" or 50" length. The sizing is simple as you trim these belt straps then clamp the nickel free buckle for a perfect fit. See the Trim To Fit instructions below.

We guarantee this product's durability for one year of normal wear.

These belts are sold separately. See our Tan Dress Belt Brown Dress Belt or Black Dress Belt

And another combination of the belts:  Dress Black and Brown Combo

Buckle:

Style:      Clamp Pin Buckle by Nickel Smart

Material:  Zinc Alloy -Certified Nickel Free™

Strap:

Color(s):   One Tan and One Black 
Width:       1⅜ inches or 35 mm wide 

Trim-to-fit belt strap has has choice of of 44 inches (112 cm) or 50 inches (127 cm); each with instructions to easily get the perfect fit!

Materials:  Top Grain Leather; 100% leather belt

Trim-to-Fit Belt Instructions:

To size your trim-to-fit belt, simply unclamp the buckle by lifting the tab (or lever) on the back side of the buckle. This will release the belt strap, allowing you to remove it from the clamp pin buckle. See illustration below:

To determine the perfect size, we recommend watching our educational video on belt sizing.  If you are in a hurry and need to size the belt now, then measure your waist through your belt loops using a tape measure.  The resulting number of inches or centimeters* is your belt size.  From the middle hole of your new belt, measure out the number of inches or centimeters of your belt size.  This is the point where you will cut the belt.  If your belt size is 34 inches, there should be this length between the middle hole and the end of the belt where you will make your cut.  Mark the strap and double check your measurements before proceeding.                              

Use sharp scissors and cut through the belt strap at the marked spot.  

Slide the clamp pin buckle onto the cut strap and press the tab firmly into the strap. Once the buckle is clamped into place, your belt is ready to wear!   

We are here to help!  Please let us know if you need additional assistance: call us at 704-947-1917.    

 

Subscribe